Scientific & Measuring Instruments · identification & value
Antique Platform Scale
Before platform scales, weighing a sack of grain meant hanging it from a steelyard. In the 1820s and 30s, inventors in Strasbourg and Vermont found ways to put a heavy load on a flat platform and balance it with small weights, and the platform scale went into every railway station, mill and grocery.
1830–1950
Expert tip
On a French bascule, check that the brass or iron weights are with the scale and look for small verification stamps struck into them: French weights and scales were checked by the state and stamped, and a scale with its original stamped weights is worth far more.
History
- Alois Quintenz of Strasbourg devised the decimal scale in the early 1820s, in which a 1 kg weight balances a 10 kg load.
- Thaddeus Fairbanks patented his platform scale in 1830, and the Fairbanks company at St. Johnsbury, Vermont, became one of the largest scale makers in the world.
Where it comes from
Strasbourg, where Alois Quintenz developed the decimal platform scale (bascule) in the 1820s; Lyon (Béranger, Trayvou) and Paris (Testut) for French platform scales; St. Johnsbury, Vermont, for Fairbanks platform scales in the US.
Details to look at
- The weighing system: a French bascule with a small weight pan at the top of the column (ratio 1:10 or 1:100), or an American sliding-poise beam reading directly in pounds.
- Platform: oak boards in a cast-iron frame, often with two wheels and a pull handle on the column for moving sacks.
- Plates and marks: cast maker's name and capacity (for example '300 kg' or '500 lbs'), plus French verification punches on the beam or weight pan.
The market: most wanted
- French decimal bascules by Béranger, Trayvou or Testut with their full set of stacked cast-iron or brass weights.
- Fairbanks platform scales in original paint with gold-leaf lettering and pin-striping.
- Small counter and grocer's platform scales with brass beams, and railway luggage scales with station names.
Authenticity: period piece or reproduction?
- Lift the platform: underneath, hardened steel knife edges should sit in their bearings with sharp, unchipped edges; a rounded edge makes the scale inaccurate.
- Cast-iron parts show sand casting and several layers of old paint; original lettering is raised in the casting, not stencilled on.
- A bascule's weights should be shaped to its weight pan and carry repeated annual verification letters struck one after another.
- Warning signs: missing or mismatched weights, a new pine platform stained dark, fresh paint with decal lettering, and broken or welded knife edges.
Where to buy
- Brocantes in Alsace, Lyon and the Rhône valley, agricultural salvage yards and Leboncoin (search 'bascule ancienne' or 'balance à bascule Béranger'); Catawiki for complete scales with weights.
- In the US, farm auctions, eBay and Fairbanks specialists, antique malls and industrial-antiques dealers; plan freight, as large scales are heavy.
Buyer's checklist
- Weights present
- Knife edges
- Maker plate
- Platform condition
Facts
- Typical size
- H 80–130 cm · platform 40 × 50 to 60 × 80 cm
- Weight
- 30–100 kg
- Period
- 1830–1950
- Materials
- Cast iron, oak, steel knife edges, brass beam and weights
- US search interest
- 230 searches a month
Collector interest
Search demand for platform scale reaches 230 US searches a month across 10 distinct queries.
Searcher intent: 22% want to buy; 17% ask what it is worth.